Kitz ADSL Broadband Information
Plusnet Broadband
 
     
support site  Support this site
 
PayPal Donate


site index
site search

adsl bar

Reset the 2 Wire 2700HG-B router

adsl bar
 

 

To reset the 2700HG-B router

The following steps are how we reset a 2 Wire 2700HGB router bought on e-bay.

 

  • Hold down the reset button on the back for 30+ seconds.

  • Upon releasing the reset button, the router resets itself to factory settings.

  • Connect a computer to the 2700HG-B and browse to the URL http://192.168.1.254/

2wire-001.png

2Wire 2700HGB reset
  • Enter a new password, confirm it and enter a password hint at the bottom of the page, in case you forget the password.

  • At this stage you might receive a "Page Not Found" error, but the password appears to be set successfully.

2wire-002.png

2wire2700HGB Password Reset
  • To continue, manually browse to the url http://192.168.1.254

  • Home Page (summary)

2wire-003.png

2wire 2700HGB reset
  • Run System Setup Wizard

  • Enter key code 5225 2374 WG62 22AS BJ7P (from http://www.2wire.com/?p=268) to set up manual config

    -> Next

    Choose TIme Zone -> Next

2wire-004.png

2wire 2700HGB setup wizard
  • Enter ISP set up details

  • For most UK ISPs this will be
    Connection type = PPPoA
    VPI = 0
    VCI = 38
    ATM Encapsulation = VC-Mux

2wire-005.png shows BTw-based config info

Set up 2wire 2700 HGB
  • For Be /O2 users only

    VPI = 0
    VCI = 101
    ATM Encapsulation = LLC

2wire-006.png shows how to config the page for Be/O2 connections (static IP)

2wire 2700 HGB setup for Be/O2
  • Exit Registration when connected to Internet
2wire 2700HGB

 

 
Copyright © Kitz 2003-
All rights reserved
Unauthorised reproduction prohibited
Valid HTML 4.01 Transitional adsl 60 spacer


|| Broadband || ISPs || Tech || Routers || Site || Wiki || Forum ||

| About | Privacy Policy |

adsl 60 spacer Valid CSS!