Restrict PC access on the SAR110 and BT Voyager
There may be times when you wish to stop certain PC's on the network
from having access at certain times of the day or night.
Below is an example of how I stopped my daughters PC from having
internet access during certain hours.
To do this I needed to set up a IP Filter rule.
From the Services Tab Select IP Filter.
Select the "Add" button near the bottom of
Then from the new "IP Filter Rule - Add" enter
the following information:-
Rule ID no
Action = Deny
Interface = ppp-0
Start time = time from which access is to be denied. *
End time = time when access will be restored.
Src Address = "eq" + IP address.
Dest Address = any
Protocol = any
TOD Rule Status = Enable
although in theory you should be able to cover the hours 10pm until
7am with one rule,
I had to set up 2 separate rules (22.00.00 to 23.59.59 and 00.00.01
to 07.00.00) for it to work correctly. :/